Azek Gate Uživatelský manuál stáhnout pdf

Tools Required

Parts

Rail Kit Items Required

Hardware

• Each Gate kit comes complete with hardware and installation guide to build one

complete single or double gate utilizing an AZEK Rail Kit (must be purchased

separately). Check the enclosed material list to ensure that the kit is complete.

• AZEK Gate should be installed in accordance with the installation guidelines

included below. AZEK Building Products Inc. accepts no liability or responsibility

for the improper installation of this product.

• AZEK Gate Kit is designed to be built to the size for which it is manufactured and

should not be altered in any way. Finished interior opening for AZEK Gates are to

measure 42-1/4” for the Single Gate and 83-1/4” for the Double Gate.

• NOTE: Gate Kit will not work with Tall Boys (steel surface mount bracket)

• AZEK Gate may not be suitable for every application and it is the sole respon-

sibility of the installer to be sure that AZEK Gate is used for its intended pur-

pose. Since all installations are unique, it is also the installer’s responsibility to

GATE INSTALLATION GUIDELINES for

AZEK Premier

AZEK Trademark

Page 1

(2) 3" 3/8 Lag Screws

(12) 3" #8 Wood Screws

(16) 1/4-20 Shoulder Screws

(1) 3/4” #10

Flat Head Screws

(2) 3/8-16 Hex. Nuts

(5) 1" #8 Wood Screws(2) 3/8-16 Set Screws

(2) 1/4-20 Pan Head Screws

(2) 1/4-20 Flat Head Screws

(1) Hinge Pin

(1) Bottom Extrusion

(1) Top Extrusion

(2) Male Cam

(2) Female Cams

(1) Latch Assy w/Hardware

(2) Screw Caps

(1) Latch Side End

(1) Inner Hinge Plate

(1) Outer Hinge Plate

(1) Hinge Side End

(2) Top End Cap

Tab

(2) Bottom End Cap

Latch Fastener Pack

(6) 2” Wood Screws

(5) 1” Self Tapping Screws

(6) Balusters

(1) Bottom Rail

(1) Hand Rail

Please read all instructions completely before starting any part of the installation.

determine specic requirements in regards to each gate application.

• AZEK Building Products recommends that all applications be reviewed by a

licensed architect, engineer, or local building ocial before installation. If you

have any questions or need further assistance, please call AZEK Customer

Service at 877-ASK-AZEK (877-275-2935) or visit our website at www.azek.com.

• IMPORTANT: Make sure the DRIVE TOOL/DRILL is congured or set to use the

SCREW setting when driving and/or tightening all FASTENERS.

• SAFETY: Always wear goggles when handling, cutting, drilling and fastening

materials.

• WARNING: AZEK Gate is for decorative use only and should not be used in a

load bearing application.

• NOTE: Check local code requirements prior to installation particularly as to

required distance between balusters to avoid child entrapment..

www.AZEK.com

3/16”

Allen Wrench

Drill

9/16”

Socket

3/16”,1/8”,5/16”

Drill Bit

Square

Drill Bit #2

Phillips

Screw Driver

9/16”

Wrench

Level

Miter/Chop Saw

1 2 3

Shrnutí obsahu

Strany 1 - Hardware

Tools RequiredPartsRail Kit Items RequiredHardware• Each Gate kit comes complete with hardware and installation guide to build one complete single or

Strany 2 - Assemble Hinge Side End

4” gap42”gate4” gap6 3/8”3 3/8”• Do not over torque screws into post.162834 5Assemble Outer Hinge PlateDrop Gate Assembly onto Hinge AssemblyAssemble

Strany 3 - Parts_DblGate

ToolsLevelPhillips Screw DriverWrenchAllen KeysDrill ToolsLevelPhillips Screw DriverWrenchAllen KeysDrillDo Not Put NutOn Set Screws.Step 7_Double Ga

Komentáře k této Příručce

Žádné komentáře

Azek Gate Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Pro domov Azek Gate. AZEK Gate User Manual Uživatelská příručka

Shrnutí obsahu

Komentáře k této Příručce

Související produkty a manuály pro Pro domov Azek Gate